Before First Use - Ninja BL681C Guide Du Propriétaire

Before First Use

PLEASE KEEP THESE IMPORTANT
SAFEGUARDS IN MIND WHEN USING THE
APPLIANCE:
IMPORTANT: Make sure that the motor base
is plugged in for use.
IMPORTANT: Never add ingredients into the
container before placing the Blade Assembly
in first.
IMPORTANT: Blade Assemblies are not
interchangeable.
IMPORTANT: DO NOT attempt to operate the
appliance without the lid on.
IMPORTANT: Never run the appliance empty.
IMPORTANT: Appliance accessories are not
intended to be used in the microwave as it
may result in damage to the accessories.
9 1-877-646-5288
WARNING: Stacked
Blade Assembly is
sharp and not locked in
place. If using the pour
spout, ensure the lid
is fully locked onto the
pitcher. Failure to do so
will result in a risk of
laceration.
WARNING: Stacked
Blade Assembly is sharp
and not locked in place.
If pouring with the lid
removed, carefully
remove the Stacked
Blade Assembly first,
holding it by the shaft. Failure to do so
will result in a risk of laceration.
WARNING: Chopping
Blade Assembly is sharp and
not locked in place. Before
emptying contents carefully
remove lid and Chopping
Blade Assembly, holding it by
the shaft. Failure to do so will result in a
risk of laceration.
CAUTION: Do not immerse the motor base into
water or any other liquid.
1
Remove all packaging material and labels from the
appliance. Separate/remove all parts from each other.
2
Wash the lids, pitcher, food processor bowl, Nutri
Ninja cups and Blade Assemblies in warm, soapy
™
water. When washing the blade assemblies, use a
dish-washing utensil with a handle to avoid direct hand
contact with blades.
CAUTION: Handle the Blade Assemblies with care
when washing, as the blades are very sharp.
3
Handle blade assemblies with care to avoid contact
with sharp edges. Rinse and air dry thoroughly.
4 The pitcher, food processor bowl, Nutri Ninja
lids, and Blade Assemblies, are all dishwasher safe.
It is recommended that the lids and blade assemblies
be placed on the top rack. Ensure that the blade
assemblies are removed from the containers before
placing in the dishwasher.
5 Wipe the motor base clean with a damp cloth.
cups,
™