Atlantic Oscartielle Notice D'utilisation Et D'installation page 15

Retrouvez tous les produits du fabricant Atlantic sur notre site internet www.confort-electrique.fr
Using the bleeder, make sure that the device is correctly filled. If, when you open the bleeder,
the water does not flow regularly, please contact your fitter.
It is forbidden to leave A switch on l when the supply tap C is open.This abnormal use causes
cancellation of the warranty.
The use of this device without water would lead to the definitive deterioration of the resistor.
This incident would definitely require its replacement, which is not covered by the Maker's
guarantee.
The boiler return tap D must obligatorily remain open, even in the case of the SUMMER SET-
TING in order to allow expansion of the fluid in the circuit so as to avoid any damage to the
device.
1) Description of the control panel
2) Use on electricity for versions:
- All electric with or without fan.
- Mixed with fan in SUMMER position.
2-1) Setting the CONFORT temperature
It is the temperature desired when the room is occupied.
a) Set the switch to
b) Set knob , the indicator
c) Wait a few hours for the temperature to stabilise.
If the temperature setting does not suit you, adjust it using the adjusting screw
2-2) Standby (Hors Gel) Mode
It is the mode enabling to maintain a temperature of approximately 7°C in the room in case of prolonged
absence from the house.
a) Leave switch
b) Set the knob
2-3) Turbo mode
It is the mode enabling to set the device into Forced Operation, ensuring prompt temperature increa-
se in the room over the time defined (maximum power for conventional models and fan activation point
for models with ventilating fan).
a) Leave the switch
WARNING
USE OF THE CONTROL BOX
to the ON position, the
lights when the ambient temperature is below that desired.
on the Marche position.
to .
on the Marche position.
Téléchargé sur www.confort-electrique.fr
Temperature setting knob with Hors Gel
and ability to restrict the range.
Time adjustment knob TURBO 1/4h, 1/2h, 1h, 2h.
Power On indicator
TURBO indicator
TURBO control
ON/OFF switch
Heating indicator
indicator lights.
position
.