Technical Data - easymaxx N1C-100JS Mode D'emploi

Technical Data

Article number:
Model number:
Voltage supply:
Power:
Speed:
Sound power level (L
Sound pressure level (L
Sound level tolerance:
Vibration emission*:
Brush diameter:
Protection class:
Type of protection:
* PLEASE NOTE:
• The specifi ed values are emission values and they do not therefore also represent safe
workplace values. Although there is a correlation between emission and immission
levels, it cannot reliably be inferred from this whether additional precautionary
measures are necessary or not. Factors which infl uence the current immission level
existing at a workplace include the nature of the workspace, other noise sources,
e. g. the number of machines and other working processes taking place nearby. The
permitted workplace values can also vary from country to country. However, this
information should help you to be able to make a better assessment of hazard and
risk.
• The specifi ed total vibration value and the specifi ed noise emission values have been
measured using a standardised testing method and can be used to compare one
power tool with another one. The emission values can also be used to make a prelim-
inary assessment of the level of pollution.
• The vibration and noise emissions may vary from the specifi ed values when the
power tool is actually used, depending on the way in which the power tool is used, in
particular what kind of workpiece is being machined.
02978
N1C-100JS
230 – 240 V~ 50 Hz
140 W
1200 rpm
)*: 88 dB (A)
WA
)*: 68 dB (A)
pA
K = 3 dB(A)
1.6 m / s² K = 1.5 m / s²
max. 100 mm
II
IP20
33 EN