Using The Bar Code Scanner To Enter Patient Information; Safety; Cleaning - FujiFilm JADAK flexpoint HS-1M Guide D'utilisation

Asia Service Center
Printed in the U.S.

Using the bar code scanner to enter patient information

You can use the bar code scanner to automatically enter patient information by scanning the patient's bar
code. When you scan the bar code, the patient's ID and other information associated with the ID, if any,
populate on the patient information form, saving time and preventing errors.
On certain systems, scanning the patient ID bar code can also query the worklist for patient information. To
enable this functionality, do one of the following:
(X-Porte) Make sure that Bar Code Auto Query is selected on the User Profile setup page and that a
worklist server is configured and connected. For more information, see the ultrasound system Help.
(SonoSite Edge II, SonoSite SII, and Edge) Make sure that Bar Code Auto Lookup is selected on the
Connectivity setup page and that a worklist server is configured and connected. For more information, see
the document Sending and Receiving DICOM Data on SonoSite Systems.
To use the bar code scanner to enter patient information
1 Tap Patient.
2 Ensure that your cursor is in the Patient ID text box.
3 Scan the patient's bar code.
Note
4 Ensure that the entered patient ID is correct. If it is incorrect, you can enter the patient ID manually.

Safety

To avoid damage to the eye, do not stare into the beam. The bar code scanner
WARNINGS
Do not allow patient contact with the bar code scanner.

Cleaning

The exterior surface and cable of the bar code scanner can be cleaned using the recommended cleaning
product.
Using the bar code scanner to enter patient information
+65 6380-5581
If your cursor is not in the Patient ID text box and the Bar Code Auto
Query/Lookup on the User Profile or the Connectivity setup page is not selected,
the scan of the patient's bar code appears in whatever text box is selected.
is a Class 2 laser product.
3