Use, Maintenance And Disposal - Erreka LEOBOX Manuel De L'installateur

USE, MAINTENANCE AND DISPOSAL

6
RELEASE FOR MANUAL OPERATION
7
MAINTENANCE

LEOBOX does not require any special care. However, every 6 months the following checks must be carried out:
1 Check that the lock is not rusty and the key turns
easily.
2 Check that the release operation can be easily
performed.
8
SPARE PARTS

If the actuator needs repairing, go to the manufacturer or an authorised Technical Repair Centre, do
not repair it yourself. Only use original spare parts.
9
DISPOSAL

The actuator, at the end of its working life,
must be removed from its location by an
installer with the same qualifications as the
one who fitted it, following the same
precautions and safety measures. This will
avoid possible accidents and damage to
adjacent installations.

Only release and lock when the actuator has
stopped.
Release Operation
1 Turn the key (1) to the limit (some 90º) in any
direction.
2 Open the swivel cover (2) fully.

You will now be able to operate the door
manually.
Locking Operation
1 Carry out the above operations in reverse order.
3 Check the correct condition of the electrical
connections and the correct operation of the
contacts.
4 Check that the screws are fully tightened.
5 Check that there is no rust inside the case.
}
The actuator must be disposed of in the appropriate
recycling bins, in order to separate and classify the
different materials accordingly. NEVER dispose of
the actuator in domestic
uncontrolled tips, as
environmental contamination.
English
rubbish bins or
this would lead to
Release Case LEOBOX
13