Unpacking And Fitting - Erreka LEOBOX Manuel De L'installateur

UNPACKING AND FITTING

3
TOOLS REQUIRED
Set of screwdrivers
Pencil for marking
2mm Allen wrench
4
UNPACKING
1 Open the packet and carefully remove the contents.
}
Dispose of the packaging in an environmentally
friendly way, using the recycling bins.

Do not leave packaging within the reach of
children or the handicapped as it may cause
injury.
5
FITTING
Electric drill and bits

Use the drill in accordance with its instructions
for use.
2 Check that the contents of the packaging are
complete. It should include the release case, two
keys and four screws and wall plugs
3 Check the contents are in the correct condition.

If you find that any parts are missing or
damaged, please contact your nearest Technical
Service.
1 Turn the key (1) to the limit (some 90º) in any
direction.
2 Open the swivel cover (2) fully.
3 Remove the screw (3) and extract the protective
cover (4).
English
11
Release Case LEOBOX