E-Bench KH 02 Mode D'emploi page 92

O M
PERATING ANUAL
Dolby Surround ProLogic
Dolby Surround ProLogic decodes programme material coded in Dolby Surround and is built into
almost every home-cinema audio system. Dolby Surround ProLogic reconstructs the original four
channels — left, centre, right and effects — which were encoded on the stereo sound tracks of
the programme material.
W S
ARNING AND AFETY
Please read the operating instructions very carefully prior to using the device and ensure that
they are retained and easy to nd for future reference. All precautionary and safety procedures
should be followed exactly as well as the following safety procedures.
Caution! Danger of electric shock!
Never open the appliance or component housings! None of the components included within
the scope of the delivery can be serviced by the user. Any servicing is to be carried out by
qualied personnel only.
This warning symbol informs the user of the dangerous voltage in the device
This warning symbol informs the user of important operating information for this device
S
ETTING UP THE EQUIPMENT
When choosing the place to set up your eBench Dolby ProLogic Surround System KH 02 the
following points should be considered:
1. Keep the equipment away from sources of heat, direct sunlight and heating elements with an
ambient temperature of 60 º C and above. Otherwise irreparable damage could be done to
the equipment.
2. The operating temperature of the equipment is between 5 º C and max. 35 º C.
3. Avoid setting up the equipment and its components in humid or dusty rooms.
4. Only set up the equipment and its components on vibration-free, level and sturdy surfaces.
5. Caution! The equipment and its components must not be exposed to either drops or splashes
of water! Objects lled with liquid, such as vases, for example, should not be placed on the
equipment!
6. The ventilation openings on the equipment and its component must not be covered up as this
could lead to the equipment overheating.
Power supply
When using the device in mains supply operation it is imperative that you heed all the
technical data and instructions found in the operating manual and those on the device.
• Caution! Only use the mains cable supplied with the device otherwise there is a danger of
re and/or electrical shocks!
• When disconnecting from the main supply be sure to grip the plug when pulling out from the
socket and never pull out by gripping the cable.
• Never handle the mains cable and/or the plug with damp or wet hands because of the danger
of electrical shocks!
• Handle electrical cables with care; do not buckle or crimp the cable. Cables should not be
laid on the oor such that it is possible to step on them. Please be especially careful with the
mains cable between the electrical socket and the device.
• Using cables and plugs which do not correspond to the stipulated voltage can result in re
and/or electrical shocks. The device should be unplugged from the mains power supply and
the batteries removed if it is not going to be used for a long period of time. The device is still
electrically live even if it has been turned off but the plug is still in the mains supply socket.
I
NFORMATION
92