Disposal - Tetra LightWave Mode D'emploi

UK
Malfunction
LED light too dark or
flickers.
Effects do not start or
at wrong time.
LightWave Timer dis-
plays the wrong time.

DISPOSAL

The LightWave Timer contains electronic components and cannot be dis-
posed of with standard household waste.
• Dispose of the device using the return system for your area so that the raw
materials can be recycled.
• Cut off all cables prior to disposal to prevent the device from being used.
12
Cause
Brightness is set too
low.
Effect is currently
enabled.
Incompatible power
supply in use.
Current time is not set
correctly.
Start time of the effect is
not set correctly.
Disable effect.
Power supply has been
interrupted.
Solution
Increase the brightness.
Once the effect has fin-
ished, the brightness will
be automatically reset.
Use the original power
supply.
Set the current time
correctly.
Set the required start
time.
Enable effect.
Set the current time
correctly.
LightWave Timer