Technical Specifications - LEGRAND Whad 0.8 kVA Manuel D'installation

COnsTrUCTiOn sPeCifiCATiOns
Weight
Size W x D x H in mm
Technology
Computer interface
Protection features
Internal, synchronised bypass
environmental specifications
Maximum altitude for storage
Storage temperature range
Operating temperature range
Range of relative humidity for operation
Grade of protection according to IEC529
Noise level at 1 metre
nominal input voltage
Nominal input voltage
Range of input voltage
Nominal input frequency
Nominal input current
Maximum input current
26
®

8 Technical specifications

3 100 87 3 100 90
3 100 88 3 100 91
3 100 89
3 100 92
88 X 390 X 355
PWM high frequency both for input stage and
output stage.
Microprocessor control logic
Standard serial RS232 for interfacing with
personal computer using the diagnostic
software that can be downloaded free of charge
from the website www.ups.legrand.com, output
to 9 pin, female, SELV insulated, DB9 connector
Electronic protection against overloads, short
circuits and excessive battery discharge.
Operation block at end of autonomy.
Inrush current limitation when switching on.
Sensor for correct neutral connection
Back feed protection (electrical insulation for
the safety of the input plug during operation in
battery mode)
Automatic
Intervenes in case of overload
and operation anomaly
1000 metres
from -20°C to +50°C
from 0°C to 40° C
from 20% to 80% non condensing
< 40 dBA
From 184V to 265V with nominal load
From 110V to 265V with 50% of nominal load
50Hz/60Hz +/-5% selectable by the operator
3 Arms 3,5 Arms
3,7 Arms 4,5 Arms
3 100 93
3 100 94
3 100 95
12 Kg.
IP21
230 V
5,25 Arms
6,75 Arms