Publicité
Les langues disponibles
Les langues disponibles
4.2 Door station Mounting
1
2
4.3 Button Mode Setting
You can set either single button mode or double button mode on door station .
‡
Single Button Mode:
with it's code among 00~15.please refer to 6.2.
‡
Double Button Mode:
00~15 of the monitor,and B button can call the adress 16~31 of the monitor.please refer to 6.2.
How to set the button mode
1.
Single Button Setting:
same time,and then power on for 3s,the unit will ring "bi...",that means single button is perform.
2.
Double Button Setting:
the same time,and then power on for 3s,the unit will ring "bi...bi...",that means double button is
perform.
Note:single button is default in restore setting.
that means the door station only has one button,it can only call the monitor
that means the door station has two buttons,A button can call the adress
set the code of door station on 10(refer to 6.1),press the two buttons at the
set the code of door station on 01(refer to 6.1),press the two buttons at
-
-
5
5
-
-
Publicité
