BEA 225 Mode D'emploi page 7

GB
1 General
Before first operating the BeA 225 adhesive pistol, please read this operating
manual carefully and thoroughly through. Please pay special attention to the
safety information in chapter 2.
This operating manual must be available to every user.
All position numbers stated in this operating manual (e.g. "nozzle (1)") apply
to the figure on page 2.
1.1 Scope of application
The BeA 225 is intended for use with hot-melt adhesive in candle form
(correct intended use).
Any other usage is unauthorized.
1.2 Specifications
Description
Included in delivery
Dimensions [mm]
Weight [g]
Operational voltage [V AC]
Power consumption [W]
Insulating Class
Safety class
Working temperature [°C]
Adhesive
Adhesive performance [kg/h*]
* depending on temperature and adhesive viscosity
1.3 Device elements
BeA 225
adhesive pistol, operating manual
220 x 230 x 35
250
220...240, 50 Hz
80
2
IP20
170
BeA hot-melt adhesive in candle form,
Ø 12 mm
0.3...0.6
1
Melt nozzle
2
Stand
3 Trigger
4
Power cable
5
Insulation socket
7
General