GARDEO PRO GPDCBT52DO Traduction Des Instructions Originales page 144

The declared vibration total value has been measured in accordance with a standard test method and
may be used for comparing one tool with another that the declared vibration total value may also be used in a
preliminary assessment of exposure.
A warning that the vibration emission during actual use of the power tool can differ from the declared
total value depending on the ways in which the tool is used and of the need to identify safety measures to
protect the operator that are based on an estimation of exposure in the actual conditions of use (taking account
of all parts of the operating cycle such as the times when the tool is switched off and when it is running idle in
addition to the trigger time).
Recommended
cutting
attachment
Blade
Blade
Trimmer head
Type
3 teeth, single
piece, metal
3 teeth, single
piece, metal
Non-metallic
Flexible cutting line
144
Cutting width Thickness of blade/
(mm) diameter of cutting
255
255
430
Blade centre
hole diameter
line (mm)
1.6
3.0
2.4
(mm)
25.4
25.4