CONTINENTAL EDISON CEHCDVD511 Manuel D'utilisateur page 26

/
For CD/MP3 Program
1.Put in a MP3/CD format disc.
2.There is Edit Mode at the right side of the list. Press enter to choose Edit Mode, then move
the LEFT button to enter song selection, press ENTER to confirm. Then move the cursor to
Add to Program at the right side, press ENTER to confirm. Move the cursor and enter
Program View to chooose program playing.
Note: If song is being played while programming, press STOP button to stop current playing
before you choose program playing.
3.To clear the program, it must be in STOP status, After choosing the sond needed to clear,
move the cursor to Clear Program. Press ENTER to confirm.
Notes: To play randomly, preset repeat state as "Repeat: off" at the right side, mode state
as "Shuffle on". Press NEXT from the remote control to play without sequence.
4.There are 3 Repeat modes and 3 Mode states at the right side, Repeat Single is to repeat
single track. Repeat Folder is to repeat tracks in the whole folder. Repeat Off is to cancel
repeat. Mode normal is to play normally, Shuffe on is to play randomly. Music intro is to play
the prelude only.
Notes: To play randomly, preset repeat state as "Repeat: off" at the right side, mode state
as "Shuffle on". Press NEXT from the remote control to play without sequence.
For DVD Program
POWER
Press the button once and the player will go into standby state.
Press the button again and the player will resume operating as before.