Publicité
Les langues disponibles
Les langues disponibles
5. Proper use
• This product is intended for use only in vehicles.
• Respect the personal and property rights of others. Do not make recordings of other people with
the Dashcam.
• Observe the right to one's own image and spoken word when recording.
• If the product will not be used for a long period of time, remove it from the windscreen to avoid sun
and temperature-related damage.
6. Getting Started
Warning - Risk of injury!
• When using this product, observe the applicable local traffic laws and regulations.
• Take care that components such as airbags, safety areas, controls, instruments, etc. and visibility
are not blocked or restricted.
• Do not allow yourself to be distracted by the product when driving a vehicle. Always pay
attention to the surrounding traffic and your environment.
Note
• Before mounting the holder, check the installation options in your vehicle. If in doubt, consult the
manual for your vehicle or contact the manufacturer.
• Never apply force when using the product or during installation.
• Check that the product is safely mounted before beginning your journey
6.1 Mounting the suction cup holder
• Remove the protective film from the suction cup.
• Open the locking lever (15) of the suction cup.
• Position the holder with the suction cup on a clean, even mounting surface (e.g. glass pane).
• Lightly press the holder onto the desired mounting surface and close the locking lever (15) to fasten
the holder.
• After mounting, always check to ensure the suction cup is securely attached.
• To remove the suction cup from the surface, open the locking lever. Then gently pull the flap to
completely release the suction cup.
6
Publicité
