ThermoPro TP-17 Mode D'emploi page 8

Masquer les pouces Voir aussi pour TP-17:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Timer
Your timer can be used whether the thermometer is in
operation or not.
EN
Countdown Timer:
Slide the mode selector switch on the back of the device
to the timer position
The second row of the screen will display the timer
information and the first row of the screen will toggle
the display of the temperatures of Probe 1 or 2.
Press ▲/HR to set the hours and ▼/MIN to set the minutes.
Press S/S (start/stop) button to start the countdown
timer. The colon between hours and minutes will flash.
If the setting or the remaining countdown timer is less
than 1 hour, the display will automatically switch to
display the minutes and seconds.
When the timer gets to 00:00, the alarm will sound. Press
any button to silence the alarm. The device has a timing
memory and will automatically display the original timer
setting when S/S is pressed to silence the alarm.
To clear the timer setting, press the ▲/HR and ▼/MIN
buttons at the same time. You can pause the timer while
it is running by pressing S/S button. Press S/S button
.
-14-
again to restart the timer.
If you are using the timer and thermometer at the same
time, you may slide the selector switch back to the cook
position during the timing session to set or view the cooking
temperatures. The timer will continue the countdown .
The alarm will sound when it reaches 00:00 and you can
silence the alarm by pressing any button.
Count up Timer:
Slide the mode selector switch on the back of the device
to the timer position
Press the ▲/HR and ▼/MIN buttons at the same time to
clear the timer setting to 00:00.
Press S/S button to start count up timer. Press it again
to stop/re-start the timer.
The timer will stop when it reaches 99 Hour: 59 Minute.
If you are using the timer and thermometer at the same
time, you may slide the selector switch back to the cook
position during the timing session to set or view the
cooking temperatures. The timer will continue counting
up .
Note: When setting the timer, you can press and hold ▲
or ▼ for fast setting.
.
-15-
EN

Publicité

Table des Matières
loading

Table des Matières