To Record A Name; Add A Name To A Number In The Call List - Topcom Callmaster 250 Mode D'emploi

Callmaster 250
• Press the Up button, you are moving from the oldest call to the
most recent call in the memory. When you have reached the end
of the list, "END OF LIST" is shown on the display.
Note : When the memory is full, the new calls automatically replace the oldest
calls in the memor y.

4.4 To record a name

You can add a name to 60 phone numbers, saved in the unit's memory.
This name has to be recorded, so that, when the same caller calls
again, the caller's telephone number as well as his/her name will be
announced.
T h e re are two ways to add a name :
• to a number that you have programmed yourself or
• to a number in the Call list

4.4.1 Add a name to a number in the call list

• Press the Up or Down button until the desired number is shown
on the display.
• Press and hold the Set button.
• As soon as you here a beep, record your name in the microphone
(recording time is 2 seconds per name).
• Release the Set button. The unit automatically plays the recorded
name as a final check.
4.4.2 Add a name to a number that you've already pro g r a m m e d
• When you want to record a name but that person's telephone
number is not saved in the memory, press the Mode/Call button
until "XXX XXX XXXX ENTER NUMBER" is shown on the display.
• P ress the Set button to select the first digit of the desired phone
n u m b e r.
Up to
100 phone numbers can be saved in the memory.
41 41 41 41 41