Publicité
Les langues disponibles
Les langues disponibles
TABLE OF CONTENTS
SCHEMATIC DRAWING
PARTS LIST
IMPORTANT SAFETY INSTRUCTIONS
SAFETY INSTRUCTIONS FOR BATTERY AND CHARGER
SPECIFICATIONS
FUNCTIONAL DESCRIPTION
OPERATION
MAINTENANCE
WARRANTY
WARNING ! Read and understand all instructions. Failure to follow all
!
!
instructions listed below may result in serious personal injury.
WARNING! When using electric tools, machines or equipment, basic safety
precautions should always be followed to reduce the risk of fire, electric shock,
!
!
and personal injury. Completely read the manual before proceeding to use this
tool.
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING THIS TOOL
1.
KEEP WORK AREA CLEAN. Cluttered areas invite injuries.
2.
CONSIDER WORK AREA ENVIRONMENT. Do not use power tools in
damp, wet, or poorly lit locations. Do not expose your tool to rain. Keep the
work area well lit. Do not use tools in the presence of flammable gases or
liquids.
3.
KEEP CHILDREN AND BYSTANDERS AWAY. All children should be
kept away from the work area. Don't let them handle machines, tools or
extension cords. Visitors can be a distraction and are difficult to protect
from injury.
4.
DO NOT EXPOSE ELECTRICAL POWER TOOLS TO MOISTURE. Rain
or wet conditions can cause water to enter the tool and lead to electric
shock.
5.
STORE IDLE EQUIPMENT. Store equipment in a dry area to inhibit rust.
Equipment also should be in a high location or locked up to keep out of
reach of children.
6.
USE THE RIGHT TOOL FOR THE JOB. Don't force a small tool or
attachment to do the work of a larger industrial tool. Don't use a tool for a
purpose for which it was not intended.
7.
DRESS PROPERLY. Don't wear loose clothing or jewelry; they can be
caught in moving parts. Protective, non-electrically conductive gloves and
non-skid footwear are recommended when working. Wear protective hair
covering to contain long hair and keep it from harm.
8.
USE EYE PROTECTION. Use a full-face mask if the work you're doing
produces metal filings, dust or wood chips. Goggles are acceptable
in other situations.Wear a clean dust mask if the work involves creating
a lot of fine or coarse dust.
9.
AVOID UNINTENTIONAL STARTING. Be sure the switch is in the OFF
position before inserting battery.
10.
DO NOT USE THE TOOL IF IT CANNOT BE SWITCHED ON OR OFF.
Have your tool repaired before using it.
11.
REMOVE BATTERY FROM TOOL BEFORE MAKING ANY
ADJUSTMENTS. Changing attachments or accessories can be dangerous
if the tool should accidentally start.
12.
STAY ALERT. Watch what you are doing & use common sense. Do not
operate any tool when you are tired, or under the influence of drugs,
alcohol or medication.
13.
CHECK FOR DAMAGED PARTS. Before using this tool, any part that
is damaged should be carefully checked to determine that it will operate.
p.10
p.12
p.13
p.14
p.14
p.15
p.15
p.17
p.18
13
Publicité
