Olympia FL-14 Mode D'emploi page 8

Turning on the electronic fl ash Turning on the electronic fl ash
Attach an electronic fl ash to the camera, and then turn the camera on with the fl ash.
TEST button/
CHARGE lamp
• If the CHARGE lamp and AUTO CHECK lamp blink simultaneously, batteries are running
low. Replace the batteries.
• If no operations are performed for about 15 minutes, the fl ash will enter sleep mode to
save power. The fl ash will also enter sleep mode whenever the camera enters sleep mode.
If no operations are performed for approximately 15 minutes more, the fl ash will turn off
automatically. Press the ON/OFF button to turn it on.
10
EN
1
Press and hold the
lights.
•
2
When the CHARGE lamp lights, press the TEST
ON/OFF
button to fi re a test fl ash.
button
•
Press the ON/OFF button again to turn the power off.
Replace the batteries if the CHARGE lamp does not
light after:
30 seconds (Alkaline batteries)
•
• 10 seconds (NiMH batteries)
button until any lamp
ON/OFF