Change Of The Battery's Connection Side For Dv Models - S&P CADB-N-D Instructions De Montage Et D'utilisation

7. .5. CHANGE OF THE BATTERY'S CONNECTION SIDE FOR DV MODELS

1.1. Loose the screws from the connection side (hot water coil).
2.1. Loose the screws with which are fixed the coil.
3.1. Remove both covers situated on the opposite side. (The covers
are located on the inner and outer side of the panel).
1.2. Remove the side panels.
2.2. Pull out the coil.
3.2. Fix the previously remove covers on the loose panel to cover
the holes.
37