Philips sonicare 1000 Série Mode D'emploi page 17

7 Insert the screwdriver between the bottom of the
battery and the white frame to break the metal tab
connecting the battery to the green printed circuit
board. This will release the bottom end of the
battery from the frame.
8 Grab the battery and pull it away from the internal
components to break the second metal battery
tab.
Caution: Be aware of the sharp edges of the
battery tabs so as to avoid injury to your fingers.
9 Cover the battery contacts with tape to prevent
any electrical short from residual battery charge.
The rechargeable battery can now be recycled and
the rest of the product discarded appropriately.
17
English