Publicité
PRELIMINARY VERIFICATIONS TO THE INSTALLATION
Verify that the piace of the installation is clean and ready for the assembly of the product.
•
Control that the product is suitable for the piace for the installation by measure, dimension
•
and technical characteristics.
Check that the delivered product corresponds to the ordered one.
•
Verify that the product to be installed is entirely intact and that the packaging contains all
•
its components.
•
Check planarity of the tray, walls and floors before its installation and/or cutting
•
Control the right flowing of the water towards the drain
•
Communication of the defaults either of the surface and/or of the structure must be made
before installation. By proceeding with the installation it is meant that the tray is accepted
the way it is and complaints will be no longer accepted.
USE AND MAINTANANCE:
Clean with detergents, non-acidic, non-aggressive (bleach, etc .. ) or objects which can
•
scratch the
surface.
Periodically perform maintenance and cleaning of the drain.
•
To clean the shower trays of resin from organic residues and/or lime deposits we
•
strongly recommend the use of the lime remover kit and of the cleaner kit
Publicité
