OPERATION
TEMPÉRATURE
HUMIDITÉ
ON/OFF
BUTTON
ACCUMULATIVE
WORK TIME
BUTTON
Control panel buttons :
1. ON/OFF button: Each press ON/OFF, the unit runs in a circulation "ON-OFF-ON". Power
on for first time ,the ON/OFF key can be function after every testing finish .
2. Fan speed button: Each press Fan speed, the unit runs in a circulation "Low speed -High
speed".
3. Timer button: Setting time to shut off or start on.
Setting time to shut off: setting time to shut off by press the "Time" button when the
machine is running. Press "Time", "TIME OFF" display on LCD light flash, each press "+",
the time increase half an hour, each press"-", time decrease half an hour. The time setting
range circulates from 0.5-140 hours. When setting time is 0, timing setting is cancelled. The
display on LCD shows current time if without operation in 5 seconds.
Setting time to start on: setting time to start on by press the "Time" each when the
machine is stop. Press "Time", the "TIME ON" display on LCD light flash, each press "+",
the time increase half an hour, each press"-", time decrease half an hour. The time setting
range circulates from 0.5-140 hours. When setting time is 0, timing setting is cancelled. The
display on LCD shows current time if without operation in 5 seconds.
4. "+" button: means humidity up, press "+" each each time, the set humidity increase for
1%. Press "+"key continuously, the set humidity increase by 5% per second. When you set
the humidity, the humidity display on LCD light flash, it will shows the current humidity if
without operation in 5 seconds, the humidity display on LCD light on.
5. "-" button: means humidity down, press "-" each each time, the set humidity decrease
for 1%. Press"-"each continuously, the set humidity decrease by 5% per second. When you
DEHUMIDIFY
WATER FULL
HUMIDITY UP
BUTTON
www.romusworld.com
www.romusworld.com
LOW FAN
SPEED
DEFROST
TOTAL TIME
TIMER
FAN SPEED
BUTTON
BUTTON
194405
EN
HIGH FAN
SPEED
ACCUMULATIVE
WORK TIME
TIME
TIMER ON
TIMER OFF
HUMIDITY DOWN
BUTTON
35