Publicité
Les langues disponibles
Les langues disponibles
(4) When charging is completed (Fig. 7)
○ The USB power indicator lamp will not go out when a USB device has been completely
charged.
To verify charge status, check the USB device.
○ Turn the USB power switch OFF and unplug the power cord from the electrical outlet.
(Fig. 7)
○ Remove the battery from the charger and place the rubber cover over the USB port.
BEFORE USE
Check the work area to make sure that it is clear of debris and clutter.
Clear the area of unnecessary personnel. Ensure that lighting and ventilation is adequate.
USING AS AN AC POWER SUPPLY
The product includes convenient AC outlets for use as a power supply for AC devices. (Two
locations: Total current capacity is 10 A.)
AC devices can be used by plugging them into the AC outlets on the charger with the charger
power supply plug plugged into an electrical outlet.
AC outlets (two locations)
NOTE:
○ AC devices connected to the charger should not exceed a total of 10 A.
Doing so may cause the charger to malfunction.
Read the instruction manual carefully for the device to be used, and check the current
rating before use.
USB cable
USB cable
Rubber cover
Plug of
the AC device
USB port
Fig. 7
AC device
AC device
Plug of the charger
Fig. 8
English
Electrical outlet
15
Publicité
