Antenna; Aux-In Function; Remarks; Specifications - Bigben RR140I DAB Mode D'emploi

6. Short press MEM,
D. MENU
D.1 Short press MENU/ INFO to show the station details.
Pop music, Mono, frequency, time, date,
D.2 Long Press MENU
Press to select Scan Setting/System & Enter (6) to start the function
• Scan Setting :-> all stations (including weak or strong), strong stations only
• Press MENU to confirm & exit the above settings.
• Press to start full scanning for all stations or strong stations only as per the setting.
• System - > Time, Language, Factory reset, SW version
Follow the steps as above mentioned in DAB version for both DAB /FM functions.

Antenna

Extend the wire to obtain the best reception. User may need to turn or change the position of the unit
to improve reception.

AUX-IN Function

1. Press the Power button
2. Plug one end of the 3.5 mm audio cable (not included) into the Aux-in jack (13) on the back panel
and the other end into the line-out jack or headphone jack of an external audio source or computer.
3. Long press the Power Button
4. MENU/ Info
• Short press MENU/ INFO to show the station details
Mains Power, Date & Time
• Long Press MENU to System & Enter (6) to start the functions
Time, Language, Factory reset, SW version
Follow the steps as mentioned above in the DAB version for both DAB/FM/Aux-In functions

Remarks:

Don't discard electrical and electronic appliances in the regular waste disposal.
• Take them to a collection point.
• Some components in these appliances may be hazardous to health and the environment.
Note: To save energy while in the Aux-in function or FM/DAB function (optional), when the unit has
no sound output, or no button is pressed for 30 minutes, the unit will be switched to stand-by mode
automatically. It can be switched ON by pressing the POWER selector again.

Specifications

Power Supply:
Power Consumption:
Radio Frequency Coverage:
Operating Frequency:
Warning!
• Make sure that battery is inserted the right way and with the right polarity
• Remove exhausted battery from the product
• The supply terminals should not be short-circuited
• Dispose of battery safely
& Enter to select the desired station to play
to turn on the unit & set the Function to AUX-In mode.
for 2 seconds to turn the radio off & go to standby mode.
AC 100-240V, 50/60Hz
12W
F88.8–108 MHz
F88.8–108MHz,
- EN 9 -