Dab Display Information (Info); Operating The Radio - Bigben RR140I DAB Mode D'emploi

Use to set the Month, Date and Year and press Enter (6) to confirm
Press MENU to confirm & exit the above settings.
2. Language
Use to select English, Deutsch, Italian & French and press Enter (6) to confirm.
Press MENU to confirm the above settings & exit the sub-functions.
3. Factory Reset
Use to select yes or no and Enter (6) to confirm
Press MENU to confirm & exit the above settings.
Return the unit to its original factory settings by performing a 'Factory Reset'. This will be useful to
re-boot the unit & cancel any settings.
4. SW Version
The unit shows you the details of the SW version.
Press MENU to confirm the above settings & exit the sub-functions.

DAB Display Information (INFO)

When listening to a DAB station, you can change the information that will appear on the display. There
are several different types of information that are sent by the broadcaster.
• Dynamic Label Segment (DLS)
This is scrolling text information supplied by the broadcaster. Information could be the name of an
artist or music title, DJ's name, contact details for the radio station etc.
• Multiplex Name :Displays the broadcasting area and collection of radio stations on this frequency
e.g.:
BBC National DAB, Station1.
• Channel and Frequency : e.g.: 13F 225.648 MHz
• Signal error: If signal is week or error signal occurs, try to adjust the antenna and relocate the
unit to improve reception.
• Program Type (PTY) such as Pop, Rock, Talk or News.

OPERATING THE RADIO

A. Auto Scan
1. Press the Power button
2. Long press button (10) for 2 seconds to start the AUTO SCAN function and automatically
search for radio stations for 3 minutes. The screen displays the digits and station numbers. Once
complete, the unit will store a maximum of 20 preset stations.
3. Short press MEM,
B. Tuning
1. Set the Function (2) to the FM mode
2. Press Skip - & Short press
3. Press Skip + & Short press
4. Adjust the Volume (3, 4) to the desired level.
5. Long press the Power Button
C. Storing Stations in Memory Positions Station no. 01 to 20
1. Set the function (2) to the FM position.
2. Tune in to the desired station, press
station.
3. Long press MEM for 2 seconds to enter the storing mode
4. Press to select the station number to store. e.g. '01, 02... 20'.
5. Press Enter (6) to store the station.
to turn on the unit & select the FM function.
& Enter to select the desired station to listen.
to scan for last station.
to scan for the next station.
(2) for 2 seconds to turn the radio off & go to standby mode.
Skip - / + & short press
- EN 8 -
to scan for the desired