Usage - Beurer HR 5000 Mode D'emploi

1. Connect the mains adapter to a suitable socket.
2. Plug the other end of the mains adapter into the connection socket
on the underside of the device. The battery indicator shows you the
current battery state in percent and the charging indicator begins
to flash. The mains adapter delivers enough power to charge the
battery and operate the device at the same time.
3. After use, pull the mains adapter out of the socket and the device.

8. Usage

Travel lock
The device has a travel lock. If the travel lock is activated, it is not
possible to switch on the device. The travel lock prevents the device
from switching on by accident (e.g. when transporting it in a suitcase).
To activate the travel lock, press and hold the ON/OFF switch
for 3 seconds. The travel lock indicator begins to flash. The device
is now locked. If the ON/OFF switch
device is locked, the travel lock symbol will light up in the display to
indicate that the device is locked.
To deactivate the travel lock, press and hold the ON/OFF switch
for 3 seconds.
Direct drive function
If the battery is completely flat, you can continue using the device
immediately via mains operation.
Tips before cutting hair
• Make sure that you wash and dry the hair to be cut.
• Comb the hair to be cut thoroughly in order to remove any knots
and to smooth down the hair.
• Wear a hairdressing cape to stop hair from landing on your neck.
Cutting hair using a comb attachment
• Select one of the two comb attachments and at-
tach it to the device as shown. Make sure that
you hear and feel the comb attachment click in-
to place. We recommend that you start with the
comb attachment with the longest cutting length
initially so you can then slowly work your way up
to your desired length.
is briefly pressed when the
22