Perel PCS18501 Notice D'emploi page 4

• Familiarise yourself with the functions of the device before actually using it. Do not allow operation by unqualified
people. Any damage that may occur will most probably be due to unprofessional use of the device.
• When using an extension cord, make sure the wires are at least 1mm². Do not use extension cords on a reel.
• Only use the device for its intended purpose. Using the device in an unauthorised way will void the warranty.
• Always make sure you are in a stable position while using the PCS18501.
• Make sure you can never touch water, electricity or gas lines while drilling.
• Do not use the PCS18501 in the vicinity of flammable vapours and substances.
• Vibrations can damage the arm-hand system. Keep exposure to vibrations as short as possible.
• Check the voltages marked on the rating plate and verify it matches your mains voltage.
3. Specific Safety Instructions
• Only use saw blades in perfect condition. Never use bent, deformed or otherwise damaged saw blades.
• Never block the saw blade.
• Do not use HSS steel saw blades.
• Remove all nails and other metal objects from the work piece prior to sawing.
• Start sawing once the blade has reached its full rotation speed.
4. Description (fig. A & B)
1. Dust exhaust
2. Mitre angle scale
3. Mitre angle adjusting
screw
4. Shoe
5. Unlock button
6. ON/OFF switch
7. Depth of cut scale
8. Mitre angle adjusting
scale
9. Depth of cut adjusting
screw
10. Ventilation vents
PCS18501
4
PEREL