Fagor VI-12 Manuel D'utilisation page 7

interior.qxd 18/5/04
5. OPERATING INSTRUCTIONS
• Before using the fan, place it on a
stable, flat surface.
• Turn the selector dial to "0" to ensure
the fan is in stop position, and plug it in.
• Select speed 1, 2 or 3.
Speeds:
0 = Off
1 = Low
2 = Medium
3 = High
The fan can be tilted upwards or
downwards manually. To do this, first turn
the selector dial to "0" and unplug the
appliance.
7. MAINTENANCE AND CLEANING
Unplug the appliance before cleaning it.
• To clean the blades, open the
protection grille fastening clips and
remove the nuts and bolts from the
grille. Clean the blades with a slightly
damp cloth. Ensure no moisture enters
the motor area.
• To assemble the fan again, close the
clips and fix the two grilles together with
the nuts and bolts.
DO NOT SUBMERGE THE APPLIANCE
IN WATER.
Do not use solvents or abrasive products to
clean the fan.
To store the appliance after cleaning,
place it in its box and keep it in a dry
place.
10:19 Página 5
6. TILT
8. STORAGE
6