Publicité
Les langues disponibles
Les langues disponibles
Installation with slotted holes
1. Build a non-combustible frame using the dimensions shown on Figure 8.
2. Secure the grille support on the frame using 4 metal screw #10 with a self-drilling point (not
included)
Installation with holes in the facing
1. Position the grille support at the desired location and pre-drill the fireplace facing.
2. Secure the grille support (B) on the facing using four concrete screws 1/4" (not included).
Note : The concrete drill bit necessary to drill the facing is usually provided with concrete screws.
4.2. Grille (C)
1. Drill holes in the finishing material following dimensions on Figure 9.
2. Secure the grille (C) with 2 appropriate #10 screws depending on the finishing material used
(not included)
Figure 12 : Installation with slotted holes
Figure 13 : Grille installation
11
Publicité
