Maintaining your car deck
Replacing fuses
•
•
Caution
Do not use fuses with amperages higher than the
fuses provided to avoid damaging the player.
Cleaning the connector
•
Note
Always shut down the engine and remove the key
from the ignition before cleaning.
30
When replacing fuses, make sure that the
amperage of the new fuse is the same
amperage as the fuse that you removed.
If the fuses blow, check the power connection
before replacing. If the fuses blow again after
being replaced, there is a problem with the
player which requires servicing.
If the connector between the player and the front
panel is dirty, the player may not operate
properly. To clean the connector, remove the
face plate and gently clean the connector with an
alcohol swab.
www.insignia-products.com
NS-C3112