Levita BPM ARM 6331 Mode D'emploi page 9

LEVITA BPM ARM 6331
10 Measurement
10.1 Important
1. This monitor automatically switches off 1 minute after the last key
operation.
2. To interrupt the measurement, simply press any key. The cuff will deflate
immediately after a key is pressed.
3. During the measurement, do not talk or move your arm or hand muscles.
4. After each measurement, the result will be automatically stored. The BPM
ARM 6331 has 3 memory zones with each 30 location. Select the desired
Memory Zone before measurement (see §11)
10.2 Procedure
mmHg
mmHg
mmHg
ERROR
1. Press the SET button repeatedly to
select the desired memory zone.
2. Press the START/STOP button to
start measurement. The cuff will
inflate to the level that is right for
you.
3. When the right level is reached, the
cuff will deflate.
4. When the measurement is
completed, systolic, diastolic and
pulse will be shown simultaneously
on the LCD screen.
When a mistake was detected
during measurement the Error
mark appears on the display
9