Levita BPM ARM 6331 Mode D'emploi page 10

LEVITA BPM ARM 6331
11 Memory
mmHg
When the batteries are installed, the data in the memories
will not be lost even when the Blood Pressure Monitor is
switched off.
10
The BPM 6331 has 3 Memory zones. Each can
store up to 30 measurements including the date
and time
The result will be stored automatically in the
selected Memory Zone after the measurement.
Select the desired Memory Zone before
measurement, by pressing the SET button
repeatedly.
To recall measurement results:
• Press the SET button repeatedly to select
the desired memory zone.
• Press the MEMORY button to see the
average of all measurement results [A].
• Press the MEMORY button again to see the
last measurement result.
• Press the MEMORY button repeatedly for
prior values stored.
• To stop reading the data, press the START/
STOP button to switch back to normal time.
To erase all data from one memory zone:
• Press the SET button repeatedly to select
the desired memory zone.
• Press the MEMORY button to see the last
measurement result.
• Press the MODE and SET button
simultaneously to erase all data from the
selected memory zone.