Eurotops TWIST & FIT Mode D'emploi page 11

M 0200 /
HL-MR02-GN
C. HOW TO USE IT ?
1) Charge the battery
If it's the first time to use or it hasn't been used for a long time, fully charge the battery before to use it.: connect it with
computer or any other charging devices whose output is DC5.0±0.25V owing to the USB cable included.
LED light stays on in red color along the charging process and will turn green color after the battery is fully charged (around
3.5hours).
Disconnect the charger after fully charged. That can effectively prolong the battery lifetime.
When the device is turned on, the indicator light flashes 3 times every 5 seconds.
At less than 60% charge, it flashes twice every 5 seconds.
At less than 30% charge, it flashes once every 5 seconds. To prolong battery life, consider recharging it before the battery is
completely discharged.
2) Change massage head
Choose the massage head and install it onto the device. To change it, simply pull on the massage head to be changed and
insert a new one instead.
3) Start
Press and hold the start key
Press and hold the start key
4) Change the speed
As soon as it is switched on, the appliance automatically switches to speed 1.
Press the button once, it goes to speed 2. The second indicator light comes on.
Each time you press the button, the device shifts up a gear. Above speed 4, the appliance returns to speed
1 if you press the button again.
Precautions: To protect bones and muscles, avoid staying too long in one area. In any case, the device
automatically turns off after 15 minutes.
D. CARE AND MAINTENANCE
Clean the product only with a dry or slightly damp, lint-free cloth.
Do not use abrasive cleaners to clean the unit.
E. FEATURES
- Material: ABS
- Power supply: Lithium batteries 1800mAh - DC5V / 2A
- Autonomy: 400 m
- Charging time: 3.5 hours
- 4 speeds: 1600/2100/2600/3200 rpm
- Noise level: 50 dB max
- 4 attachments included: cylindrical, round, flat, U-shape
for 3 seconds.
for 3 seconds to shut down.