Check The Connections; With No Load; With Maximum Load - KERN KFB-A04 Notice D'installation

1.2 Check the connections

1.2.1 With no load:

Connect the meter to the analogue module

1.2.2 With maximum load:

Remove the load from the weighing plate; the reading value should be ~ 0 V;
this means that the analogue module has been connected correctly
KFB-A04-A05-IA-e-1910
Unload weighing plate
The reading value should show ~ 0 V;
readjust VR 1 to correct
Load weighing plate with maximum load
The reading value should show ~ 10 V;
readjust VR 1 to correct
+
5