Attach Chimney Mounting Bracket; Hang The Hood - Siemens LC479050UC Manuel D'installation

5) Attach Chimney Mounting
Bracket

6) Hang the Hood

English 4
Install two screws in top hood screw holes. Leave a 1/4" of each screw exposed.
Attach spacers to holes on chimney mounting bracket arms, as seen in figure 2.
Attach chimney mounting bracket to wall through chimney screw holes created in
previous step. Use two screws.
Figure 3: Attach Chimney Mounting Bracket
Place the hood by sliding the mounting holes in the top of the hood over the
exposed screws.
Figure 4: Hang the Hood
1/4"
Check and adjust hood for level.