Télécharger
Partager
Imprimer la page
WATER-i.d. Pool Lab 1.0 Manuel D'utilisation
  1. Manuels
  2. Marques
  3. WATER-i.d. Manuels
  4. Instruments de mesure
  5. Pool Lab 1.0
  6. Manuel d'utilisation

WATER-i.d. Pool Lab 1.0 Manuel D'utilisation

Masquer les pouces Voir aussi pour Pool Lab 1.0:

Publicité

Liens rapides

Télécharger ce manuel
www.poollab.org
Water-i.d.
water testing equipment
NEW: Quick Start
Guide included!
NEU: Inklusive Schnellstartanleitung! (S.14) | NUEVO:
¡Guía de inicio rápido incluida! (p.14) | NOUVEAU:
Guide de démarrage rapide inclus ! (p.14) | NUOVO: Guida
rapida inclusa! (p.14)
Water Testing solutions
M a d e
User Manual
Gebrauchsanleitung
Manual de usuario
Manuel d'utilisation
Manuale dell'utente
www.water-id.com
i n
G e r m a n y
®
®
V29
®

Publicité

loading

Manuels Connexes pour WATER-i.d. Pool Lab 1.0

Sommaire des Matières pour WATER-i.d. Pool Lab 1.0

  • Page 1 Water-i.d. ® ® water testing equipment ® User Manual Gebrauchsanleitung Manual de usuario Manuel d'utilisation Manuale dell'utente NEW: Quick Start Guide included! NEU: Inklusive Schnellstartanleitung! (S.14) | NUEVO: ¡Guía de inicio rápido incluida! (p.14) | NOUVEAU: Guide de démarrage rapide inclus ! (p.14) | NUOVO: Guida rapida inclusa! (p.14) www.poollab.org www.water-id.com...
  • Page 3 Content | Inhalt | Contenido Contenu | Contenuto Delivery Content Changing Batteries Switching On / Off General Advices / Important 7 – 9 Tablet & Liquid Mode Switch 10 – 13 Quick Start Guide 14 – 17 ZERO 18 – 19 TEST | Active Oxygen (MPS) 20 –...
  • Page 4 Delivery Content 1 x PoolLab 1.0 ® 1 x Light shield 3 x AAA Batteries 1 x Crushing | Stirring Rods 1 x 10ml syringe 1 x User guide 20 x Phenol Red Photometer tablets 20 x DPD N° 1 Photometer tablets 10 x DPD N°...
  • Page 5 Batteries | Batterien | Pilas | Piles | Batterie Change | Wechseln | Cambio Changer | Cambiamento No rechargeable batteries! | Keine aufladbaren Batterien! ¡No hay baterías recargables! | Pas de piles rechargeables! Niente batterie ricaricabili! 3 x AAA...
  • Page 6 Switch On | Einschalten | Encender Allumer | Accendere 00:02 ZERO The On/Off button can also be used to skip countdown during measurement (not recommended). Die On/Off Taste kann auch zum Abbrechen des Countdowns während der Messung verwendet werden (nicht empfohlen). El botón de On/Off también se puede utilizar para cancelar la cuenta atrás durante la medición (no se recomienda).
  • Page 7 Advices | Hinweise | Consejos Conseils | Consigli PHOTOMETER RAPID Always use PHOTOMETER grade tablets! Never use RAPID grade tablets! Do not touch reagent tablets! Immer PHOTOMETER-Tabletten und nie RAPID-Tabletten ver- wenden! Die Tabletten dürfen nicht berührt werden! ¡Usar siempre tabletas FOTÓMETRO y nunca usar tabletas RAPID! Las tabletas no se deben tocar! Toujours utiliser des pastilles de qualité...
  • Page 8 IMPORTANT | IMPORTANTE | WICHTIG Detergent waterproof (IP68 ) ZERO It is important to clean the device after each measurement to get rid of any reagent residues! Please ensure that the cuvette has been cleaned before each measurement (e.g. under clear water/or simply rinsing the cuvette in the pool is sufficient as long as no residues remain).
  • Page 9 È importante pulire il dispositivo dopo ogni misurazione per eliminare i residui di reagente! Assicurarsi che la cuvetta sia stata pulita prima di ogni misurazione (ad esempio sotto l'acqua chiara o semplicemente sciacquando la cuvetta nella piscina è sufficiente, purché non rimangano residui). Do not leave the device in the sun! Lassen Sie das Gerät nicht in der Sonne liegen! ¡No deje el dispositivo al sol!
  • Page 10 NEW! Tablet Mode → Liquid Mode Tabletten Modus → Flüssigreagenz Modus Modo Tableta → Modo Reactivo Líquido Mode Comprimés → Mode Réactif Liquide Modalità Compressa → Modalità Reagente Liquido pH | fCl₂ | tCl₂ | cCl₂ | Br₂ | ClO₂ | O₃...
  • Page 11 Tablet Mode: Press And Hold ZERO + Power Button ZERO ZERO ZERO Liquid Mode: Press And Hold ZERO + Power Button ZERO ZERO ZERO...
  • Page 12 From firmware version 72 onwards, you have the option of measuring the following parameters with tablets as well as with liquid reagents: pH, chlorine, chlorine dioxide, ozone and bromine. You can choose between two measurement settings in the unit: Tablets and liquid reagents. To ensure that the correct measurement result is displayed, check the current mode by pressing and holding ZERO &...
  • Page 13 A partire dalla versione 72 del firmware, avete la possibilità di misurare i seguenti parametri sia con pastiglie che con reagenti liquidi: pH, cloro, ossigeno attivo, biossido di cloro, ozono e bromo. È possibile scegliere tra due impostazioni di misurazione nell'unità: Compresse e reagenti liquidi.
  • Page 14 QUICK START GUIDE Kurzanleitung Guía De Inicio Rápido Guide De Démarrage Rapide Guida Rapida Scan the QR-code to watch our intstruction video...
  • Page 15 Hold & Press To Switch On 3 x AAA 00:02 ZERO START: Take 10 ml Water Sample 10 ml No Reagents! waterproof (IP68 ) ZERO Put On Lightshield ZERO ZERO ZERO ZERO...
  • Page 16 Remove Lightshield Reagent(s) For Your Test (Refer To Chapter In Manual) ZERO ZERO Put On Lightshield Use Force! ZERO ZERO Completely Dissolved Residue Shortcut Await For Your Countdown Test (Refer To Chapter In Manual) ZERO ZERO...
  • Page 17 Quick Start Guide | Kurzanleitung | Guía De Inicio Rápido | Guide De Démarrage Rapide | Guida Rapida Empty & Clean For Next Test: Take 10ml waterproof (IP68 ) ZERO 10 ml *If Device Was Not Switched *If Device Was Switched Off, Off, Start From Step 8 Start From Step 3 Repeat...
  • Page 18 ZERO waterproof (IP68 ) ZERO Take 10 ml Water Sample 10 ml No Reagents! waterproof (IP68 ) ZERO ZERO ZERO ZERO...
  • Page 19 Only 1 Time Per Test Batch | Nur Ein Mal Pro Testreihe Sólo Una Vez Por Lote De Prueba | Une Seule Fois Par Lot De Test | Solo Una Volta Per Test In Batch The "ZERO" step (page 18) is only necessary once after switching on. Make sure that the water to be measured does not (!) contain any tablet/reagent in the cuvette and that the light protection cover is in place.
  • Page 20 Active Oxygen Aktivsauerstoff Oxígeno Activo Oxygène Actif Ossigeno Attivo (MPS) 0.0 – 30.0 ppm (mg/l) DPD N°4 Photometer* 10.0 30.0 *not part of standard equipment waterproof (IP68 ) ZERO Take 10 ml Water Sample waterproof (IP68 ) 10 ml ZERO...
  • Page 21 Active Oxygen | Aktivsauerstoff | Oxígeno Activo Oxygène Actif | Ossigeno Attivo 1 x DPD N°4 Use Force! Photometer* ZERO! (p.18) Completely Dissolved ZERO ZERO ZERO Residue ZERO ZERO...
  • Page 22 Alkalinity Alkalinität Alcalinidad Alcalinité Alcalinità 0 – 200 ppm (mg/l) CaCO₃ Alkalinity–M Photometer waterproof (IP68 ) ZERO Take 10 ml Water Sample waterproof (IP68 ) 10 ml ZERO...
  • Page 23 Alkalinity | Alkalinität | Alcalinidad Alcalinité | Alcalinità Use Force! 1 x Alkalinity-M ZERO! (p.18) Photometer Completely Dissolved ZERO ZERO ZERO Residue ZERO ZERO...
  • Page 24 Bromine Brom Bromo Brome Bromo 0.0 – 13.5 ppm (mg/l) DPD N°1 Photometer (DPD 1A + 1B Liquid) Glycine* 13.5 *not part of standard equipment waterproof (IP68 ) ZERO ZERO ZERO! Take 10 ml Water Sample (p.18) waterproof (IP68 ) 10 ml ZERO ZERO...
  • Page 25 Bromine | Brome | Bromo Brom | Bromo Only if your water sample does contain Chlorine next to Bromine (both disinfectants used), the following procedure "A" needs to be followed and Glycine* reagent needs to be used. Otherwise (only Bromine present), please follow procedure "B". Nur wenn die Wasserprobe neben Brom auch Chlor enthält (beide Desinfektionsmittel wurden benutzt), muss das Verfahren „A"...
  • Page 26 With Chlorine | Mit Chlor | Con Cloro Avec Du Chlore | Con il Cloro Glycine* Use Force! Completely dissolved ZERO ZERO Residue Tablet Or Liquid? (p. 10) DPD N°1 Photometer Use Force! DPD 1A + DPD 1B Completely dissolved ZERO ZERO Residue...
  • Page 27 Bromine | Brom | Bromo | Brome | Bromo Without Chlorine | Ohne Chlor Sin Cloro | Sans Chlore | Senza Cloro Tablet Or Liquid? (p. 10) DPD N°1 Photometer DPD 1A + Use Force! DPD 1B Completely Dissolved ZERO ZERO Residue 8 /6...
  • Page 28 Calcium Hardness Kalziumhärte Dureza De Calcio Dureté Calcique Durezza Del Calcio 0 – 500 ppm (mg/l) POL20CaH1* POL20CaH2* *not part of standard equipment waterproof (IP68 ) ZERO ZERO ZERO! Take 10 ml Water Sample (p.18) waterproof (IP68 ) 10 ml ZERO ZERO...
  • Page 29 POL20CaH1* POL20CaH2* *Shake Before Use! 10 x 10 x ZERO ZERO ZERO ZERO...
  • Page 30 Calcium Hard. | Kalziumhärte | Dureza De Calcio | Dureté Calcique | Durezza Del Calcio ZERO ZERO ZERO ZERO...
  • Page 31 Hardness Conversion | Härte-Umrechnung | Conversión De Dureza | Conversion De Dureté | Conversione Di Durezza CaCO °dH* °e* °f* mval S 4,3 mg/l mmol/l (KH) (CH) (DC) 0.01 0.056 0.07 0.02 1 mg/l CaCO 10.0 1 mmol/l K S 4,3...
  • Page 32 Chlorine Chlor Cloro Chlore Cloro 0.00 – 8.00 ppm (mg/l) DPD N°1 Photometer (DPD 1A + 1B Liquid) DPD N°3 Photometer (DPD 3C Liquid) 0.00 4.00 8.00 waterproof (IP68 ) ZERO Take 10 ml Water Sample waterproof (IP68 ) 10 ml ZERO...
  • Page 33 Tablet Or Liquid? (p. 10) DPD N°1 Photometer DPD 1A + ZERO! (p.18) DPD 1B ZERO ZERO Use Force! Completely Dissolved ZERO ZERO Residue...
  • Page 34 Tablet Or Liquid? (p. 10) DPD N°3 Photometer DPD 3C ZERO ZERO ppm = mg/l Use force! Completely Dissolved ZERO ZERO Residue...
  • Page 35 Free Chlorine | Freies Chlor Cloro Libre | Chlore Libre | Cloro Libero ZERO Total Chlorine is measured directly after free Chlorine without emptying the cuvette. The DPD 3 tablet is added to the sample water which already contains the DPD 1 tablet (dissolved). Combined Chlorine is calculated as Total Chlorine minus free Chlorine.
  • Page 36 El cloro total se mide directamente después de cloro libre, sin necesidad de vaciar la cubeta. La tableta DPD 3 se añade a la cubeta en la que la tableta DPD 1 ya está disuelta. El cloro combinado se calcula a partir de cloro total menos cloro libre.
  • Page 38 Chlorine Dioxide Chlordioxid Dióxido De Cloro Dioxyde De Chlore Biossido Di Cloro 0.00 – 11.40 ppm (mg/l) DPD N°1 Photometer (DPD 1A + 1B Liquid) Glycine* 0.00 5.00 11.40 *not part of standard equipment waterproof (IP68 ) ZERO ZERO Take 10 ml Water Sample ZERO! (p.18) waterproof...
  • Page 39 Only if your water sample does contain Chlorine next to Chlorine Dioxide (both disinfectants used), the following procedure "A" needs to be followed and Glycine* reagent needs to be used. Otherwise (only Chlorine Dioxide present), please follow procedure "B". Nur wenn die Wasserprobe neben Chlordioxid auch Chlor enthält (beide Desinfektionsmittel wurden benutzt), muss das Verfahren „A"...
  • Page 40 With Chlorine | Mit Chlor Con Cloro | Avec Du Chlore | Con il Cloro Glycine* Use Force! Completely Dissolved ZERO ZERO Residue Tablet Or Liquid? (p. 10) DPD N°1 Photometer Use Force! DPD 1A + DPD 1B Completely Dissolved ZERO ZERO Residue...
  • Page 41 Cl. Dioxide | Chlordioxid | Dióxido De Cl. Dioxyde De Cl. | Biossido Di Cl. Without Chlorine | Ohne Chlor Sin Cloro | Sans Chlore | Senza Cloro Tablet Or Liquid? (p. 10) DPD N°1 Photometer Use Force! DPD 1A + DPD 1B Completely Dissolved...
  • Page 42 Cyanuric Acid Cyanursäure Ácido Cianúrico Acide Nurique Acido Cianurico 0 – 160 ppm (mg/l) CYA–Test Photometer waterproof (IP68 ) ZERO ZERO ZERO! Take 10 ml Water Sample (p.18) waterproof (IP68 ) 10 ml ZERO ZERO...
  • Page 43 1 x CYA–Test Use Force! Photometer Completely Dissolved ZERO ZERO Residue ZERO ZERO...
  • Page 44 Hydrogen Peroxide Wasserstoffperoxid Peróxido De Hidrógeno Peroxyde D'Hydrogène Perossido Di Idrogeno (LR) 0.00 – 2.90 ppm (mg/l) Hydr. Peroxide LR Photometer* 0.00 1.45 2.90 *not part of standard equipment waterproof (IP68 ) ZERO ZERO ZERO! Take 10 ml Water Sample (p.18) waterproof (IP68 )
  • Page 45 1 x Hydr. Peroxide Use force! Photometer* completely dissolved ZERO ZERO residue ZERO ZERO...
  • Page 46 Hydrogen Peroxide Wasserstoffperoxid Peróxido De Hidrógeno Peroxyde D'Hydrogène Perossido Di Idrogeno (HR) 0 – 200 ppm (mg/l) Hydr. Peroxide HR Photometer* Acidifying PT *not part of standard equipment waterproof (IP68 ) ZERO ZERO Take 10 ml Water Sample ZERO! (p.18) waterproof (IP68 ) 10 ml...
  • Page 47 1 x Acidifying Use Force! ZERO ZERO Completely Residue Dissolved 1 x Hydr. Peroxide Photometer* Use Force! ZERO ZERO Completely Residue Dissolved ZERO ZERO...
  • Page 48 Ozone Ozon Ozono 0.00 – 4.00 ppm (mg/l) DPD N°1 Photometer (DPD 1A + 1B Liquid) DPD N°3 Photometer (DPD 3C Liquid) Glycine* 0.00 2.00 4.00 *not part of standard equipment waterproof (IP68 ) ZERO ZERO Take 10 ml Water Sample ZERO! (p.18) waterproof...
  • Page 49 Only if your water sample does contain Ozone next to Chlorine (both disinfectants used), the following procedure "B" needs to be followed and Glycine* reagent needs to be used. Otherwise (only Ozone present), please follow procedure "A". Nur wenn die Wasserprobe neben Ozon auch Chlor enthält (beide Desinfektionsmittel wurden benutzt), muss das Verfahren „B"...
  • Page 50 Without Chlorine | Ohne Chlor Sin Cloro | Sans Chlore | Senza Cloro Tablet Or Liquid? (p. 10) DPD N°1 + DPD N°3 Use Force! Photometer DPD 1A + DPD 1B + DPD 3C Completely Dissolved ZERO ZERO Residue ZERO ZERO...
  • Page 51 Ozone | Ozon | Ozono With Chlorine | Mit Chlor Con Cloro | Avec Du Chlore | Con il Cloro Tablet Or Liquid? (p. 10) DPD N°1 + DPD N°3 Use Force! Photometer DPD 1A + DPD 1B + Completely DPD 3C Dissolved ZERO...
  • Page 52 With Chlorine | Avec Du Chlore Con Cloro | Mit Chlor | Con il Cloro 0 ml ZERO 10 ml waterproof (IP68 ) ZERO Glycine* Use Force! Completely Dissolved ZERO ZERO Residue...
  • Page 53 Ozone | Ozon | Ozono With Chlorine | Avec Du Chlore Con Cloro | Mit Chlor | Con il Cloro Tablet Or Liquid? (p. 10) DPD N°1 + DPD N°3 Use Force! Photometer DPD 1A + DPD 1B + Completely DPD 3C Dissolved ZERO...
  • Page 54 6.50 – 8.40 pH Phenol Red Photometer (Phenol Red Liquid) waterproof (IP68 ) ZERO Take 10 ml Water Sample waterproof (IP68 ) 10 ml ZERO...
  • Page 55 Tablet Or Liquid? (p. 10) Phenol Red Photometer ZERO! (p.18) Phenol ZERO ZERO Use Force! Completely Dissolved ZERO ZERO Residue...
  • Page 56 ZERO The Total Alkalinity value has to be minimum 50 mg/l to obtain a correct pH value. La valeur totale de l'alcalinité doit être au minimum de 50 mg/l pour obtenir une valeur de pH correcte. El valor de alcalinidad debe ser superior a 50 mg/l para obtener un pH correcto.
  • Page 58 PHMB 5 – 60 ppm (mg/l) PHMB Photometer* *not part of standard equipment waterproof (IP68 ) ZERO ZERO ZERO! Take 10 ml Water Sample (p.18) waterproof (IP68 ) 10 ml ZERO ZERO...
  • Page 59 PHMB 1 x PHMB Photometer Use Force! Completely Dissolved ZERO ZERO Residue ZERO ZERO...
  • Page 60 It is imperative that you clean the objects used for the measure- ment and come into contact with the sample water containing the reagent (cuvette, lid, stirring rod) thoroughly with a brush, water and then with distilled water, otherwise the measuring equipment may turn blue over time.
  • Page 62 Total Hardness Gesamthärte Dureza Total Dureté Totale Durezza Totale 0 – 500 ppm (mg/l) POL20TH1* POL10TH2* *not part of standard equipment waterproof (IP68 ) ZERO ZERO Take 10 ml Water Sample ZERO! (p.18) waterproof (IP68 ) 10 ml ZERO ZERO...
  • Page 63 POL20TH1* POL10TH2* *Shake Before Use! 10 x ZERO ZERO ZERO ZERO...
  • Page 64 Urea Harnstoff Urée 0.1 – 2.5 ppm (mg/l) Dechlor* PL Urea PL Urea Ammonia N°1 Ammonia N° *not part of standard equipment waterproof (IP68 ) ZERO ZERO Take 10 ml Water Sample ZERO! (p.18) waterproof (IP68 ) 10 ml ZERO ZERO...
  • Page 65 1 x Dechlor ZERO ZERO Use Force! ZERO ZERO Completely Dissolved Residue PL Urea *Shake Before Use! ZERO ZERO...
  • Page 66 PL Urea *Shake Before Use! ZERO ZERO ZERO ZERO...
  • Page 67 Urea | Harnstoff | Urée 4 14 Ammonia N°1 ZERO ZERO Ammonia N°2 ZERO ZERO...
  • Page 68 ZERO ZERO If the sample contains free chlorine, a „Dechlor“ tablet has to be added to the vial, before adding PL Urea 1 and PL Urea 2. Ammonia N° 1 only dissolves entirely after Ammonia N° 2 was added. Ammonia and chloramines will be detected together. The result displayed will show the sum of both.
  • Page 69 Urea | Urée | Harnstoff Si la muestra contiene cloro libre, hay que añadir una pastilla de "Dechlor" al vial, antes de añadir PL Urea 1 y PL Urea 2. Ammonia N°1 no se disuelve por completo hasta que agregue Ammonia Nº 2. El amoníaco y cloraminas se detectan juntos.
  • Page 70 OR-UR (Dilution) | OR-UR (Verdünnung) OR-UR (Dilución) | OR-UR (Diluzione) OR = Overrange / UR = underrange. Test result is outside the range of the method. OR results can be brought into measurement range by dilution. Use syringe to take only 5ml (or 1ml) sample water plus 5ml (9ml) distilled water.
  • Page 71 Error Codes | Fehlercodes | Códigos De Error | Codes D'Erreur | Codici Di Errore Change batteries | Batterien wechseln | Cambiar las BAT!: pilas | Changer les piles | Cambiare le batterie Err02: (Too dark) Clean measurement chamber or dilute sample | (Zu dunkel) Messkammer säubern oder Was- serprobe verdünnen | (Demasiado oscura) Limpie la cámara de medición o diluya la muestra | (Trop sombre)
  • Page 72 Troubleshoot | Fehlerbehebung | Soluc. Problemas | Dépannage | Risoluzione Die Problemi 1) 01.01.1970: The date on the PoolLab 1.0 is set to 01.01.1970 when ® delivered, after each battery change and after each update. Please reconnect to the LabCOM app so that the smartphone date is adopted again.
  • Page 73 1) 01.01.1970: la date du PoolLab 1.0 est réglée sur le 01.01.1970 à la ® livraison, après chaque changement de batterie et après chaque mise à jour. Veuillez vous reconnecter avec l'application LabCOM pour que la date du smartphone soit à nouveau adoptée. 2) Valeurs idéales: Veuillez contacter le fournisseur de la chimie de votre piscine pour demander les valeurs idéales pour votre piscine.
  • Page 74 Changing The Cuvette | Küvettenwechsel | Cambiar La Cubeta | Changer La Cuvette | Cambiando La Cuvetta 90° ZERO ZERO 90° ZERO ZERO...
  • Page 75 Accessories | Zubehör Accesorios | Accessoires | Accessori Reagents | Reagenzien | Reactivos | Réactifs | Reagenti POL01-Nf 20/20/10/10/10 Phenol Red / DPD N° 1 / DPD N° 3 / –Test / Alkalinity–M Photometer TbsPph50 50 x Phenol Red Photometer TbsPD150 50 x DPD N°...
  • Page 76 Software & App | Logiciels & App Software & Aplicación Bluetooth ON Bluetooth OFF ZERO www.poollab.org Windows/MacOS:...
  • Page 77 Technical Data | Technische Daten | Datos Técnicos | Données Techniques | Dati Tecnici www.poollab.org MSDS msds.water-id.com Cloud labcom.cloud 530 nm / 570 nm / 620 nm LED: 3 x AAA (1.5 V, LR03) 300 sec. ï 5 - 45°C IP 68 (1 h / 1.2 m) Developed in Germany Produced in PRC...
  • Page 78 Tolerances | Toleranzen Tolerancias | Tolérances | Tolleranze Active Oxygen (MPS) | Aktivsauerstoff (MPS) Oxígeno Activo (MPS) | Oxygène Actif (MPS) Ossigeno Attivo (MPS) Range ± 0.0 – 5.0 0.5 ppm (mg/l) 5.0 – 15.0 1.3 ppm (mg/l) 15.0 – 25.0 3.8 ppm (mg/l) 25.0 –...
  • Page 79 Calcium Hardness | Kalziumhärte Dureza De Calcio | Dureté Calcique Durezza Del Calcio Range ± 0 – 25 8 ppm (mg/l) 25 – 100 22 ppm (mg/l) 100 – 300 34 ppm (mg/l) 300 – 500 45 ppm (mg/l) Chlorine | Chlor | Cloro | Chlore | Cloro Range ±...
  • Page 80 Tolerances | Toleranzen Tolerancias | Tolérances | Tolleranze Chlorine Dioxide | Chlordioxid Dióxido De Cloro | Dioxyde De Chlore Biossido Di Cloro Range ± 0.00 – 2.00 0.19 ppm (mg/l) 2.00 – 6.00 0.48 ppm (mg/l) 6.00 – 10.00 1.43 ppm (mg/l) 10.00 –...
  • Page 81 Ozone | Ozon | Ozono Range ± 0.00 – 1.00 0.07 ppm (mg/l) 1.00 – 2.00 0.17 ppm (mg/l) 2.00 – 3.00 0.51 ppm (mg/l) 3.00 – 4.00 0.68 ppm (mg/l) Range ± 6.50 – 8.40 0.11 pH PHMB Range ±...
  • Page 82 Tolerances | Toleranzen Tolerancias | Tolérances | Tolleranze Urea | Harnstoff | Urée Range ± 0.00 – 0.30 0.05 ppm (mg/l) 0.30 – 0.60 0.06 ppm (mg/l) 0.60 – 1.00 0.09 ppm (mg/l) 1.00 – 1.50 0.12 ppm (mg/l) 1.50 – 2.50 0.19 ppm (mg/l)
  • Page 83 Disposal | Entsorgung Eliminación | Élimination | Smaltimento Device Batteries According to EC Directive 2002/ According to EC Guideline 2006/ 96/EC, electronic devices must 66/EC, user is obliged to dispose not be disposed of in normal in a proper manner by returning domestic waste.
  • Page 84 UKCA Complaince Statement UK Conformity Assessed We, Water-i.d. GmbH Germany, hereby certify our responsibility, that the following product: PrimeLab 2.0 Photometer, is tested to and conforms with the essential test suites included in the following standards, which are in force within the UK: Standards Legislation Number Regulations 2016 (S.I.
  • Page 85 FCC Part 15 Compliance Statement IC Licence-Exempt RSS Compliance Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
  • Page 86 Environment) This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Changes or modifications not expressly approved by Water-i.d. GmbH could void the user‘s authority to operate the equipment. FCC ID: 2ALRR-POOLLAB10 22610- POOLLAB10 Model: POOL LAB 1.0...
  • Page 88 Certificate | Zertifikat | Certificado Certificat | Certificato Certificate Of Compliance We hereby certify that the device PoolLab 1.0 ® With it‘s serial number as stated below, has passed intensive visual and technical checks as part of our QM documentation. We confirm the device got factory-calibrated.