Princess 282997 Mode D'emploi page 10

General
This Wine Tap & Cooler is basically an
insulated unit with a cooling element and a
cavity for 2- or 3-liter Bag-in-Box (BIB)
wine. The BIB's tap is used to dispense the
wine. The tap of the BIB is elevated to
facilitate wine glasses. The Wine Tap &
Cooler can cool anywhere between 7 and
18 degrees Celsius, making it ideal for
white, rosé and red wines.
Besides for the BIB's the Wine Tap &
Cooler can also be used to cool one or two
standard bottles of wine.
Operation and
controls
See Figure 1.
The appliance is equipped with the
following features:
1 Main cover
2 Bottle openings with covers (2x)
3 Main cover grip
4 Tap cover
5 Drip tray
6 Power adapter
7 Temperature control wheel with main
switch
8 Indicator LED
Before first use
1 Take the appliance out of the
packaging.
2 Make sure that the mains voltage is the
same as indicated on the type plate on
the adapter.
3 Clean the appliance. See 'Maintenance
and cleaning'.
Use
1 Place the appliance on a flat, stable
surface where it cannot fall.
2 Connect the appliance with the power
adapter and put the plug into the wall
socket.
Use with 2- or 3-liter BIB's
1 Remove the main cover from the
appliance.
2 Slide the tap cover up and remove it
from the appliance.
3 Position the BIB with the tap in the
appliance with the tap in the opening in
the front.
Make sure the tap slides completely
down in the opening. See figure 2.
4 Slide the tap cover in the opening till it
covers the BIB tap.
5 Make sure the two covers are closing
the bottle openings in the main cover.
6 Place the main cover on top of the
appliance.
7 Switch on the appliance with the
temperature control wheel and adjust
the temperature setting.
The LED indicator light shows that the
cooler is switched on.
Give the appliance some time to bring
the wine to the adjusted temperature.
8 Push against the drip tray and slide it
out.
9 Place a glass on the drip tray below the
tap.
10 Open the tap and let the wine flow in
the glass.
11 Close the tap to stop the wine from
flowing.
Use with one or two wine bottles
See Figure 3.
1 Remove the main cover from the
appliance.
2 Position the wine bottle(s) in the
appliance.
3 Remove the cover(s) from the bottle
openings in the main cover.
Article 282997 Wine Tap & Cooler 5