ECG BTS Elysium S1 Black Mode D'emploi page 30

1. Turn the speaker ON/OFF
Long press 1 for 2 seconds to turn the speaker ON or OFF.
2. Bluetooth mode
1) Bluetooth pairing
When switched on, the LED indicator flashes. Next, enable Bluetooth on your mobile phone or other
device and initiate the search for Bluetooth devices. BTS Elysium S1 is offered, which you connect. Once
connected, the speaker announces "Device paired" (Device paired) and the LED indicator turns blue.
2) Wireless music playback
Simply start the playback on your mobile phone or music player and listen to music from your speaker.
3) Hands-free paired with your mobile phone
Accepting an incoming call
Short press 7 to accept an incoming call.
Hang up
Short press 7 again to hang up.
Redial
Double press 7 to initiate a call to the previously called number.
GB
Private call
Press briefly the button 5 or 8 to be able to switch between the speaker and the phone during a call.
Reject an incoming call
Long press 7 to reject an incoming call.
4) Disconnect an existing Bluetooth connection
The speaker will automatically pair with the last known Bluetooth device. Long press 2 to disconnect
from the current Bluetooth connection, the speaker will indicate "Device disconnected". The speaker is
then ready to be paired with another device.
3. Play music from the micro SD card
After inserting the micro SD card (see fig.) into the speaker and briefly pressing the button 2
the speaker switches to playback mode from the memory card and plays music directly from
the micro SD card. The speaker will indicate "Memory card mode" before playing. Long press
the button 2 to switch on or off the voice guide.
4. Voice guide
Once enabled, the speaker plays information regarding the current playback mode, e.g.:
Bluetooth mode (Bluetooth mode), device paired (device paired), device disconnected (device disconnected),
etc.
You can turn off the voice guide by long pressing the button 2.
5. TWS (Stereo playback)
Turn ON two BTS Elysium S1 speakers and switch both into Bluetooth mode.
When you press briefly the button 4 one of the speakers starts search for the other speaker BTS Elysium S1
and the other speaker will be connected automatically. The LED indicator in the 4 button of the second paired
speaker lights up orange. After a successful pairing, the LED indicator 4 of the speaker playing the left channel
turns blue and the LED indicator 4 of the speaker playing right channel turns orange.
Next, enable Bluetooth on your mobile phone or other player and initiate the search for Bluetooth devices.
"BTS Elysium S1" appears, connect the speakers.
Notes
• You can use this function only with both speakers BTS Elysium S1.
• Both paired speakers can be disconnected from your mobile phone/player by short pressing 4. The
speaker will indicate "TWS disconnected".
• Long press 4 on any of the speakers to disable TWS. The speaker will indicate "TWS Cleared".
30