Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Technical data
Power supply
Backup battery
Max. Working current
(Alarm)
Max. standby current
Transmission Distance
Tranmission Frequency
Siren volume
LED indicator
IP class
Working temperature
Humidity
Weight
Dimensions
* The real transmission distance can
be different, pending on local scenario.
Features
Pairing
Low Battery Warning
Tamper Alarm
Reset
10 | English
BURGprotect_SIRENE2151_03-2019.indd 10
DC 12V 1A
3x D (LR20)
350 mA
20 μA
Without obstacle 200 m*
Indoor max 50 m*
433.05 – 434.79 MHz
120 dB @ 30 cm
Red (left) / Red (right)
IP54
-10 °C bis 40 C°
≤90%rh
(non- condensing)
951 g
(without Batteries)
1.370 g (incl. Batterien)
(L x W x H)
240 x 220 x 70 mm
Supports scanning QR
code on App
Advice on App
Supported
Supported
Preparation before use
Remove the fixing screw on the downside
of the device.
Remove the splash guard (left).
Note: It is recommended to install the power
plug, in order to provide a permanent power
supply.
Therefore, pass the cable through the two
holes provided (right).
Enter the batteries and connect device
the power plug to injector. Move ON/OFF
switch to ON position
Pair device with BURGprotect
mount to mounting location.
BASE before
TM
SIRENE 2151
09.04.2019 11:36:5
Publicité
Table des Matières
