Emjoi AP-3RP Mode D'emploi page 28

2. Hold the device so that the end cap of the
roller is pointing upwards and press the
release button. The roller will "spring"
out.
3. Remove the roller from its bracket.
4. Use your fi nger to push the new roller
out of its protective sleeve and hold the
roller on its end cap between the fi n-
gers on your other hand.
5. Slide the roller into the bracket in the
device until you hear it engage in place.
6. Make sure that the roller is fi rmly se-
cured by lightly shaking the device back
and forth.
28