iwc Ingenieur Chronograph Mode D'emploi page 27

Attaching the bracelet
up flush with the upper edge of the securing link. Please
be sure to check the correct seating of the pivot pin.
Effective from November 2004.
Technical specifications subject to change.
Attach the component parts of the
bracelet link to the connection
point, and push the pivot pin into
the bracelet from the side (1).
Using the special tool provided,
now press the securing pin down-
wards (2) and, at the same time,
slide the pivot pin back into
the bracelet until it lies flush (3).
The securing pin must be brought
26 | 27