Samsung 670 Manuel D'installation page 32
Masquer les pouces
Voir aussi pour 670:
- Manuel d'installation (60 pages) ,
- Manuel d'utilisation (73 pages) ,
- Manuel d'installation (58 pages)
Table des Matières
Publicité
No
Category
REACH
14
Solution
15
Security
16
System
✎ REACH (Remote Enhanced Active Control for Hospitality) est une télécommande professionnelle et interactive qui
vous permet de fournir des mises à jour du micrologiciel du téléviseur, des données de clonage, des modifications de
la carte des chaînes, du contenu S-LYNK REACH, ainsi que du contenu TICKER via RF DTV, à plusieurs centaines
de téléviseurs de lieu d'accueil en même temps. Les fonctions REACH ne sont disponibles qu'en mode Standalone
[Autonome]. Le serveur REACH est vendu séparément. Pour plus d'informations sur le fonctionnement du serveur
REACH, reportez-vous au manuel qui accompagne le produit.
32
Français
EU_Install Guide_FRA.indd 32
Hotel TV Function
Item
initial value
REACH 3.0
OFF
REACH 2.0
OFF
REACH Channel
...
Group ID
...
Ticker
...
REACH Update Time
...
REACH Update
...
Immediate
Room Number
...
REACH 2.0 TV Sound
...
REACH 2.0 Server
...
Version
Password Input
...
Password Setting
...
Password Reset
...
Security Mode
...
USB
...
HDMI
...
TTX Security
...
Self Diagnosis for TV
...
Self Diagnosis for HTV
...
SW Update
...
Service Pattern
OFF
Sound Bar Out
OFF
TV reset
...
Description
• ON: Open the REACH 3.0
• OFF:Closed the REACH 3.0
• ON: Open the REACH 2.0
• OFF:Closed the REACH 2.0
Select SIRCH Update Channel
Select the SIRCH Group ID
• On: The TICKER contents is displayed.
• Off: The TICKER contents is not displayed.
Select the SIRCH update Time. In the SIRCH update time , you have the
option to perform an automatic upgrade at 12:00 AM/PM or at 2:00 AM/
PM. You can perform hourly upgrades at an interval of either 1 hr or 2 hrs.
• On : Whenever the TV enters Standby mode, always performs the
SIRCH Update.
• Off : Only performs the SIRCH Update at the selected SIRCH Update
Time
Edit the room number
• On: The TV sound in the current TV source is output continuously even
though the REACH 2.0 TV menu is displayed.
• Off: The TV sound in the current TV source is stopped when the REACH
2.0 TV menu is displayed.
Display the version of the SIRCH Clone file currently updated on the TV.
Input Password 00000000.
Set new Password.
Reset Password to 00000000.
Security Mode ON or OFF.
USB Disable or Enable.
HDMI Disable or Enable.
TTX function Enable or disable
Enter the Self Diagnosis Menu.
• Picture Test: Use this to check for picture problems. If the problem
appears in the test picture, select Yes and follow the directions on the
screen.
• Sound Test: Use the built-in melody sound to check for sound prob-
lems. If the problem occurs during the test, select Yes and follow the
directions on the screen.
This lets you check the state of the Variable audio out and the
communication with the SI STB or SBB. If you encounter any problems in
the variable audio out feature or communication with the SI STB or SBB,
please check this items.
SW USB Update function
Display the Service pattern.
An external device such as a Samsung Sound Bar can be connected
to the TV via an Anynet Connection and the TV Sound can be routed to
the Sound Bar Device. If the feature is OFF in the Hotel Factory Menu,
this functionality is disabled The main TV Speaker will be muted while the
Sound Bar option is ON and the Speaker is connected through HDMI.
Factory reset
2014-04-14
11:18:07
Publicité
Table des Matières
