Periodic Maintenance - Kiva Athena 08 Manuel D'utilisation

L
TRAcTIoN PRoBLEmS
Tension the drive cable on the handle (see K2).
L1
m

PERIoDIc mAINTENANcE

Engine: 1st oil change after 5 hours and then every 25 hours of operation. Follow the instructions in the engine maintenance booklet.
Tighten all the bolts in the machine after 5 hours of operation. Then check them periodically.
Reduction gearbox
Checking the oil level at least every 100 hours of use. Level required: 25mm from the upper edge after the cap.
Oil quality: SAE 10W-30 - Class SG or SF.
N
SymBoLS
Cutting height control
N*
Forward movement clutch
control
1
3
L2
Blade clutch handle
2 4
7 - EN
If there is insufficient adjustment, tighten the screw 1.
Rotating blade: keep hands and feet away. Risk of severing.
1 - Disconnect the sparkplug before any maintenance or repair
work.
2 - Lame rotative attention aux projections.
3 - Read the user's manual.
4 - Keep safety distances.
1
Accelerator