Télécharger Imprimer la page

MT Logic TK-385 Mode D'emploi page 5

Publicité

Les langues disponibles

Les langues disponibles

LOCATION OF CONTROLS AND INDICATORS
Diagram of Back and Front Panel.
FRONT PANEL
1. Frequency Tuning
Knob
2. Frequency Pointer
3. Mode Switch
4. Battery Charging
Indicator
5. Volume Knob
BACK PANEL
6. Aux In Socket
7. Headphone Socket
8. AC/DC Input Socket
9. Adjustable FM
Antenna
10. Battery Compartment
Turn clockwise to turn the FM Frequency range from 88-108MHz
Turn clockwise to turn the AM Frequency range from 540-1600 KHz
Point at the AM/FM frequency you chosen when turning the Tuning Knob
Charge -
Turn the knob to right to switch on Battery Charging Function
OFF
-
Turn the knob left to turn off the unit
FM
-
Turn the knob to 1st position to switch on FM band
AM
-
Turn the knob to 2nd position to switch on AM band
This LED will flash in RED light during charging the battery.
This LED will glow in GREEN light when the battery is fully charged.
This LED will turn off (no light) when diconnecting the charging.
Turn clockwise to increase volume
Turn anti-clockwise to decrease volume
Connect a stereo or mono Audio source to this stereo input socket
i.e. MP-3 Player, iPod Player, CD player or a TV
Connect a separate headphone jack to this socket to listen the unit, and the main
speaker will be turned off
Plug in the power adaptor (included) and connect to the power sources for AC
operation or for Battery charging
Adjust this telescoping antenna and position it for best reception.
In Strong FM signal locations, reducing the length of antenna until better reception.
The AM antenna is built inside the unit. If AM reception is unsatisfactory, you may
have to turn the unit slightly unit you find the position that provides the best
reception.
Keep the antenna retracted for protecting it during listening to AM or the unit is not in
use.
Rechargeable batteries already installed.
ENGLISH
01

Publicité

loading