8. Axles: Hold your arm up as high as possible to tension
the skin. Shave the appropriate point with back and forth
movements.
9. Intimate area: You can pre-cut extremely long hair with
the attachment comb. To do this fit the attachment comb
onto the appliance. If necessary tension the portion of
the skin to be shaved and move the appliance slowly over
the skin in the direction opposite of the direction of hair
growth.
10. Beard contours: Cut the hair carefully according to the
contour that you desire.
11. Ensure that the shaving head always has contact with
the skin. If you tension the part of your skin you want to
shave, with your other hand, it is easier to shave.
12. If hair has been caught in the shaving head, switch off
the appliance and clean the shaving head, as described
in the chapter, "Cleaning and care".
13. When you are finished cutting hair, switch off the
appliance via the ON/OFF button.
14. Clean the appliance after every use.
15. After shaving, do not apply skin care agents that contain
alcohol on the skin because these agents can cause skin
irritations. Naturally, you can apply alcohol-free, mild
care lotions or creams directly after shaving.
Caution: The blades of the shaving head
are sharp - danger of injury!
CLEANING AND CARE
Switch off the appliance via the ON/OFF switch.
1. Never immerse the appliance in water or other liquids in
order to clean it. Ensure that water cannot get into the
housing of the appliance.
2. Never clean the appliance and the accessories in the
dishwasher.
3. Do not use sponges that can scratch, scouring agents,
steel wool, metal objects, disinfectants or hot cleaning
agents, as they can damage the appliance.
4. Wipe off the appliance with a damp cloth.
20
Copyright UNOLD AG | www.unold.de