Outwell OPAL Mode D'emploi page 3

Wireless playback
1. Long press " " for 2 seconds for power ON to Wireless
speaker. Please don't plug the audio cable into the line- in
jack when Wireless playback.
2. Turn on your cell phone or Wireless device on the Wireless
function, and search for devices in the Wireless menu.
3. When the name of the speaker appears on the Wireless
devices list, select it to establish pairing and connection
(if asked for a passkey, enter 0000).When the pairing and
connection is successful, it produces a connected tone,
and Wireless indicator changes to slow flash, the speaker is
ready for playing music.
4. When the connection between the mobile and the speaker
is successful, and the speaker is playing music, the music will
be stopped when incoming call is reaching and the speaker
will play incoming call alert, and short press "
the call, others'speech will be broadcast via the speaker, Long
press "+/- " to adjust desire volume for conversation. Please
keep toward the speaker within 1meter distance during
phone conversation. Short press "
The speaker is automatically restored before playback music.
To reject the incoming call, long press "
reject the incoming call. To redial the previous call number,
short press " " twice for redial.
5. If the pairing is overtime or no flash for indicator light,
please repeat step 1 to 3 for re-connection.
Audio input mode
1. Please insert 3.5mm audio cable into the audio input
port of the product, with MP3, cell phone or other audio
connections, audio music playback, adjust the audio output
volume to achieve the best sound , and the green indicator
is on.
2. Long press "+/-" to adjust desire volume to achieve the
best sound. The speaker is already adjusted to the max.
sound volume when 'du.du.du' sound is occurred.
3. Through "audio line-in" jack playing music, short press
" " for play/pause , the last song, the next song are no
function. Please control music through your music device.
4. Please pull out the audio cable to disconnect the devices
from the speaker, the speaker will switch back to the
Wireless mood , blue status indicator is flashing again, and
the product will automatically pair back with the last device.
Charging and emergency power
1. Connect DC 5V adapter with the Micro USB for power
supply and charging the built-in rechargeable lithium
battery synchronously, the red power indicator flickers.
After the full charge , the red indicator is on.
Disconnect the adapter all the power charging indicators
are off.
2. Includes Built-in high capacity lithium battery, connect
USB power cable to the USB output port, to provide
emergency power to charge your phone or tablet; when
charging the green indicator lights on, when the green
indicator light flashes means the built-in battery power is
insufficient, please charge it.
" to answer
" to hang up the phone.
" for 2 seconds to
3
3. When the speaker in the charging process, the
emergency power interface can not provide power output.
Night Light function
The wireless speaker is with Night light function. Please
short press " " for Light ON/OFF, or long press "
adjust the dimmer function.
SOS Function
Short press "SOS" for SOS. Short press to turn off
Packing Accessories
1. Micro USB cable x 1
2. Line in audio cable x 1
3. Instruction manualx1
Caution!
1. The product accords with IPX4 waterproof level, don't
directly rainy or put in water, should be kept away from fire,
high temperature environment to avoid the product does
not work normally and explosion.
2. When the product is playing music via Wireless
technology, the music may caused intermittent or noise
because of the environment or the source device (such as
mobile phones) interference or software incompatibilities
etc... Please adjust the distance between the music device
and the unit, or restart the unit's power supply or restart
the music device or change to other music source to have
better sound performance.
3. When the product is during a call via Wireless technology,
the conversation may be intermittent or noise, or phone
off because of the environment or the network signal
interference or poor etc... Please adjust the distance
between the phone and the unit, or change to other calling
device, or restart the unit's power supply etc..to improve the
calling quality.
4. The power supply output 5V and current 1A or more.
5. If it is stopped using for a long time , pls make sure it is
full charged.
6. The product built-in rechargeable lithium battery, please
do not pollute the environment when discarded, try to
classify recycling.
7. The product should be used for the first time after the
battery is fully charged.
" to
UK