PowerA FUSION Manuel De L'utilisateur page 8

ENGLISH
WIRELESS SETUP
1. Press and hold the Power Button for 2 seconds to turn on the headset.
2. Press and release the Bind Button on the Xbox Series X|S or Xbox One and the Xbox logo
will start to blink.
3. Press and hold the Bind Button for 2 seconds on the headset and the Power Button LED
will start to blink quickly.
4. The Power Button LED will change to solid white once pairing is successful.
5. Insert the microphone and bend to position it in front of your mouth.
6. Press the Microphone Mute Button to mute the microphone. The Microphone LED will
turn red.
7. Press and hold the Microphone Mute Button for 2 seconds to turn mic monitoring OFF or ON.
8. Adjust the volume by turning the Volume Balance Dial on the left ear cup.
9. Adjust the game/chat balance by turning the Game/Chat Balance Dial on the right ear cup.
10. FOR XBOX: Go to (Settings) > (General) > (Volume & audio output) and under (Headset
Format) choose your preferred setting.
NOTE: Windows 10 requires the Xbox Wireless Adapter (either built into the PC or sold separately).
WIRED SETUP
1. Connect orange end of 3.5mm cable into the headset, and black end into your device.
NOTE: The audio cable is one-way and must be connected correctly. The orange end
connects to the headset's orange input, and the black end connects into your device.
2. Insert the microphone and bend to position it in front of your mouth.
3. FOR XBOX: Go to (Settings) > (General) > (Volume & audio output) and under (Headset
Format) choose your preferred setting.
4. FOR PC: If your PC uses separate connectors for audio (pink and green) a headset
splitter cable is needed (sold separately).
5. FOR NINTENDO SWITCH: Game chat is supported either in-game or through the Nintendo
Switch Online App and varies by game. Adjust volume on the Nintendo Switch console
using the physical + and – volume buttons, or via the Quick Settings screen.
6. FOR PS4™: Go to (Settings) > (Devices) > (Audio Devices) and set the "Output to
Headphones" option to "All Audio".
NOTE: In Wired Mode, the buttons on the headset will not work and all audio settings will
need to be adjusted through the device.
CHARGING
1. Plug the Micro USB end of the cable into the headset and the other end of the cable into
a USB power source.
2. While charging the Power Button LED will pulse orange, and then turn off when fully
charged.
3. When the battery level is under 10%, the Power Button LED will start blinking orange.
TROUBLESHOOTING
For latest FAQs, visit PowerA.com/Support
PROBLEM: Why do I hear static or no sound?
SOLUTION: When in Wireless Mode, ensure the FUSION Pro Wireless Headset is paired with
the console, that the Volume Balance Dial is not set to minimum, and that the Game/Chat
Balance Dial is not maxed out to either Game or Chat audio.