Table des Matières
Publicité
5. Place the shelf bracket (4) over the bottom edges of the left bracket, right bracket,
and back plate, making sure that the assembly holes line up. (figure 3)
figure 3
Shelf bracket
6. Insert four of the 10-32 x 3/8 screws (6) through the holes on the shelf bracket and
into the left and right brackets and back plate, and tighten them in place. (figure 4)
figure 4
Shelf bracket
Instruction manual
5
10-32 x 3/8 screw
Publicité
Table des Matières
