Renkforce SR-2000U Notice D'emploi page 44

External, active subwoofer:
PLAY
SUB-WOOFER
PHONO DVD CD
LINE-OUT
TAPE
Receiver
Connect the subwoofer output („SUB-WOOFER LINE-OUT") to the line input of your active subwoofer using
a suitable cinch cable.
If your subwoofer has several inputs, observe that you connect the receiver to the line input.
The connection of passive subwoofers to the receiver is not possible but must be a subwoofer
with integrated amplifier (active subwoofer).
External Equalizer:
PLAY REC
PHONO CD
DVD
TAPE
Receiver
An external equalizer or signal processor can be connected to the processor.
• Connect the analogue outputs of your equalizer (usually designated „OUTPUT" or „LINE OUT") to the
sockets „EQ PLAY" of the receiver.
• Connect the analogue inputs of your equalizer (usually designated „INPUT" or „LINE IN") to the sockets
„EQ REC" of the receiver.
44
L
R
REC REC
PLAY
EQ
L
R
PLAY REC
EQ
INPUT
External subwoofer
LINE LINE
OUT IN
L
R
External Equalizer