Ideeo HM-0937 Mode D'emploi page 7

GB
Connection to the mains supply
Make sure that the supply voltage corresponds with the voltage marked on the
rating label of the appliance. This product complies with all binding CE labelling
directives.
Familiarisation
1. Multi-stage switch and release button
2. Plastic housing with handle
3. Power cord with plug (on rear)
4. 2 beater attachments
Important safety instructions
✦
Before using the appliance, the user should read the following instructions
carefully.
✦
Before the appliance is used, the main body as well as any attachment fi tted
should be checked thoroughly for any defects. Should the appliance, for
instance, have been dropped onto a hard surface, it must not be used any
longer: even invisible damage may have adverse eff ects on the operational
safety of the appliance.
✦
Always switch the appliance off and remove the plug from the wall socket
before adding, changing, removing or cleaning any attachments or tools.
✦
Warning: after switching the appliance off , always wait until the moving
parts have come to a complete standstill before touching them.
✦
Do not allow the appliance or its power cord to touch hot surfaces or to come
into contact with any heat sources.
✦
Do not touch any moving parts during operation.
✦
Always place the appliance on a work surface impervious to splashes and
stains.
✦
Do not leave the appliance unattended while in use.
✦
The power cord should be regularly examined for any signs of damage. In the
event of such damage being found, the appliance must no longer be used.
✦
Always remove the plug from the wall socket
✦
after use,
✦
in case of any malfunction,
✦
before cleaning the appliance.
✦
When removing the plug from the wall socket, never pull on the power cord;
always grip the plug itself. Do not allow the power cord to hang free.
7
Hand blender